How frame-fitted (Perfect Fit) blinds are measured, and why it matters

Most blinds are forgiving. If a roller blind is a few millimetres off, nobody notices, because it hangs in front of the window or inside a recess with a little room to spare. Frame-fitted blinds are different. They sit inside the window frame, against the glass, and clip in without a drill. That neat finish is the whole appeal, and it is also why they have to be measured properly.
This is what we look at when we measure for one. You do not need to do any of it yourself, but it helps to know why the survey matters.
What frame-fitted means
A frame-fitted blind, such as our Perfect Fit blinds, is held in a slim frame that clips onto the window's own frame. Nothing is screwed into the uPVC and nothing is drilled, so there are no holes if you ever change your mind. The blind moves with the sash or door, which is why it is popular on French doors, back doors and tilt-and-turn windows. Because the blind is held close to the glass and moves with the window, it is also a tidy choice where there is a handle to work around.

Why we measure three times
Windows are rarely perfectly square, and glass is rarely perfectly consistent. So instead of taking one measurement, we take three in each direction:
- the width at the top, the middle and the bottom, and we use the smallest;
- the drop on the left, the middle and the right, and we use the smallest.
The smallest figure is the one the blind has to fit, so that is the one that counts. A blind made to the largest figure would be too big for the tightest part of the opening.
Clearance around handles
Supplier guidance asks for at least 25 mm of clear space from the edge of the glass to anything in the way, such as a window handle or a hinge. A blind needs somewhere to sit and move, and if a handle protrudes too far into that space the blind cannot clear it. This is one of the main reasons a particular window is not suitable, and it is much better to find that out at the survey than after the blind has been made.
Seals and beading
The rubber or plastic seal around the glass matters too. If a seal sticks out more than 6 mm over the glass, the way the window is measured changes depending on whether the seal is soft enough to compress or solid. It sounds like a small detail, but it can alter the size of the blind, so it is worth getting right.
How deep is the frame?
The last check is the depth from the face of the window frame back to the glass. This decides which brackets the blind needs, and it is measured with a depth gauge. Not every window has enough depth for a frame-fitted blind. If there is not enough room, we will say so and suggest something else, such as a standard roller or a blind fitted to the wall.
How big can they go?
Frame-fitted blinds are made up to 140 cm wide, so they suit doors and ordinary windows but not very wide glazing. If your window is wider than that, look at a different type of blind. Our comparison of Perfect Fit and INTU explains the options, and panel blinds are worth a look for wide openings.
What kinds of blind come frame-fitted?
Several types are available, including roller, pleated and cellular blinds, and there is a frame-fitted shutter too. See pleated blinds, cellular blinds and frame-fitted shutters. Which one suits depends on the window and what you want from it.
A checklist if you want to look yourself
- Is there a handle, hinge or stay close to the glass?
- Does the glass sit in a bead or a rubber seal, and does the seal stick out?
- Is the window wider than 140 cm?
- Is the frame uPVC? Frame-fitted blinds are designed for it.
If you can answer all four comfortably, a frame-fitted blind is likely to suit. If not, it is worth a conversation.
Common questions
Can I measure the windows myself?
You can take rough measurements to get an idea of what you need, but frame-fitted blinds are unforgiving. We recommend a survey so that clearance, seals and depth are checked at the same time.
Will a frame-fitted blind work on every uPVC window?
No. It depends on the handle, the seals and the depth of the frame. That is why we check each window instead of assuming.
What if my window is not suitable?
We will tell you plainly and suggest an alternative. There are plenty of other ways to dress a window.
To have your windows checked, book a free home survey or call us on 01444 635090. We bring samples to the house, so you can see the fabrics against your own windows.